1. After the wire harness type connector is crimped, it is necessary to carry out appearance inspection and circuit smoothness inspection. The inspection methods of different models are different.
2. The closed height of the wire harness type connector should be correct when crimping, the crimping head should not have wire ends, and the air pressure should be within the specified range.
3. The wire harness type connector must meet the requirements of the relevant application standards and the requirements of the specification.
4. Pay attention to the depth of the crimping of the wire harness type connector. Some people think that only a little contact is enough. In fact, different combination depths are different. A little carelessness will lead to unqualified, resulting in unnecessary consequences.
