1. The connector harness insulator must fully enter and extend through the crimp tab.
2. Multiple wires in the insulation layer of the connector harness must pass through the insulation crimp.
3. Connector crimping will not damage the insulation of the wire harness.
4. When the connector is crimped, wrap and support the wire harness insulation completely, and do not expose openings larger than 45 degrees.
5. The harness insulation is not pierced to the point where the protrusions penetrate the conductors or wires.
6. The connector crimps should be in contact with the top of the wire harness insulation.
7. The insulation layer of the wiring harness should be flush with the crimping wire of the connector.
8. To identify harness insulation that shows wire damage.
9. Wires, connectors, assembly processes, and harness insulation must be compatible.
