Common audio lines are divided into the following four types according to their functions:
Instrument line:
Very common on stage, is the direct connection between guitar, bass, keyboard or other electronic instrument and sound device. It is mainly used for the transmission of low-level instrument signals, usually using 1/4 large double core connector. Don't forget to take noise and interference into account when choosing the length.
Jump connection:
Jump wires can be connected to different locations and are short in length. They are usually used to connect PA or recording devices to other devices or to connect individual units on the signal chain. According to the requirements of use, the use of balance and asymmetric two connection modes.
Microphone:
This is a kind of shielded balance line, the general use of microphone one end is XXLR male head, one end is XLR female head, some microphone lines have TRS and 3.5mm mini plug, and the output end is a USB interface, can be directly connected with the computer sound card, DAW or digital recorder directly, so the microphone line can be selected when the long balance line.
Loudspeaker wire
It is an unbalanced line, because of its higher requirements for high voltage signal and larger requirements for wire, so the diameter of the horn line is larger than the above three kinds, and there are many types of horn line joints, such as: horn line 1/4 head, banana head, cannon head, junction post, etc.
If you want to buy audio cable, you can find us wushuang cableconnector.
