1, the use of diagonal error will be required for the length of the twisted pair at least 0.6 meters, and then use the twisted pair stripping machine to cut off the outer layer of 2~3 cm.
2, the exposed orange to their own front, brown to their own direction, green to the left, blue to the right, right direction, orange to the left, right direction.
3, put green and blue in the center, orange and brown are not moving, successively as left one orange, left two blue, left three green, left four brown.
4, carefully separate each pair of lines, white mixed line in front, the color of the line is regular.
5, use scissors or diagonal pliers to cut off the exposed twisted pair wire, the remaining length is about 14 mm, and then insert each silk wire in turn into the RJ45 pin, the first pin should be placed in the orange silk wire, and so on.
